CMP 3
The CMP 3 pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The CMP 3 pyranometer is designed for continuous indoor and outdoor use.
The CMP 3 pyranometer (ISO Second Class) is intended for shortwave global solar radiation measurements in the spectral range from 310 to 2800 nm. The thermopile detector measures irradiance up to 2000 W/m² with response time <18 seconds and typical sensitivity 10 µV/W/m² that varies less than 5 % from -10 ºC to +40 ºC.
Operating temperature range is -40 ºC to +80 ºC and the stability is better than 1 % per year.
The CMP 3 pyranometer features a snap-on white sun shield, integrated leveling and a weatherproof connector which is supplied pre-wired with 10 m of signal cable for simple installation. An optional mounting rod and longer cable lengths are available. Two CMP 3s can easily be mounted back-to-back to make a low-cost albedometer
Egenskaper
- Low cost radiometer for accurate routine measurements
- Weatherproof cable connector
- Easy way of leveling the instrument
- Sun shield reduces the heating of the body
- Two CMP 3s can form a albedometer
Spesifikasjoner
|
Spectral range |
310 to 2800 nm |
|
Sensitivity |
5 to 20 µV/W/m² |
|
Response time |
18 s |
|
Zero offset A |
± 15 W/m² |
|
Zero offset B |
± 5 W/m² |
|
Directional error (Upto 80 º with 1000 W/m² beam) |
± 20 W/m² |
|
Temperature dependence of sensitivity (-10 ºC to +40 ºC) |
± 5 % |
|
Operating temperature range |
-40 °C to +80 °C |
|
Maximum solar irradiance |
2000 W/m² |
|
Field of view |
180 ° |