CSD 3
CSD 3 measures sunshine duration. Sunshine duration is defined by WMO as the time during which the direct solar radiation exceeds the level of 120 W/m².
It has no moving parts and uses 3 photo-diodes with specially designed diffusers to make an analogue calculation of when it is sunny. The output is switched high or low to indicate sunny or not sunny conditions. The calculated direct irradiance value is also available. CSD 3 operates from 12 VDC power and has built-in heaters to dissipate rain, snow and frost. These are normally switched externally but an optional internal thermostat control is available.
The humidity indicator shows clearly when a change of drying cartridge is necessary. A waterproof plug-and-socket cable connection for easy installation and servicing. The larger screw on drying cartridge is easier to change at extended intervals.
Egenskaper
• Waterproof plug-and-socket cable connection for easy installation and servicing• Humidity indicator to show when a change of drying cartridge is necessary
• Larger capacity drying cartridge that is easier to change at reduced intervals
• Glass tube, for improved resistance to scratching by storm-blown sand and ice
• Operating temperature range extended, -40 ºC to +70 ºC
Spesifikasjoner
|
Spectral range |
400 to 1100 nm |
|
Operating temperature range |
-40 to +70 °C |
|
Sunshine signal |
1 ±0.1 V (direct radiation > 120 W/m²) |
|
Accuracy |
> 90% (monthly sunshine hours) |
|
Accuracy |
> 90% (direct signal for clear sky) |
|
Analogue output signal |
1 mV/Wm² |
|
Non-stability |
< 2 % change per year |
|
Temperature dependence |
< 0.1 %/K |
|
Response time |
< 1 m s |
|
Power supply |
12 VDC |